Joined in 2023 
82 
63 About this deal
You would need a transformer to reduce the mains voltage down to 12 volts. There are two types of transformers available in the market. One is the electromagnetic transformer and the other is electronic. Electronic transformers are preferred due to their efficiency and low cost. #3 The compatibility
Saving money and the environment are the benefits of replacing halogen with a light emitting device. Is it worth replacing bulbs with LED? In your outdoor lighting systems, you can often see halogen lighting. Flood light bulbs can be replaced with LEDs and last a long time. Can I replace 12V 50W halogen with LED?The answer is no, they will not hurt your eyes. There is a concern about the blue light used in theLED bulb. It’s only a problem for people with existing eye conditions. The same amount of blue light is used by our phones, computers, and tablets. Are 8000k LED headlights legal? I have 6 downlight fittings in my lounge on a single dimmer switch. I want to replace the current lamps for LED version. The info. on the bulb is LCLEXNE MR16+C 12v 50w 1045. There are light emitting devices you can use in your fixture. The equivalent of a 50 watt bulb will burn between six and seven watt. Can I replace 2 pin halogen bulb with LED? The natural energy-saving properties of LED light bulbs means that they can offer the same brightness of a halogen equivalent, but using only a fraction of the power. A 5W LED spotlight, for example, can offer the same brightness of light as a 35W halogen spotlight.
At this point, it’s important to note that if it is a halogen transformer,this maximum load applies to halogen light bulbs only. For example, if you have a 40VA transformer for halogen bulbs, you should not install 40-watts worth of LED light bulbs. This would overload the fitting and potentially cause a safety issue. FAQ about 12V transformer and light emitting device compatibility. The cost of efficiency and extra power consumption are explored in the FAQ article. The ‘LED drivers’ are designed for DC light. What is the difference between halogen and LED?
I have recently replaced my MR16 halogens with LEDs around 50 of them. LEDS have an Equivalent wattage to 35. For example, if you have one 35W halogen installed in your kitchen, ensure you swap it for 35W equivalent LED. The actual wattage of the LED light bulb may vary, but the equivalent wattage must be the same as your current halogen bulbs. For example, you might find both 5W and 6W LED light bulbs that have an equivalent wattage of 35W; both of these would be fine to replace 35W halogen bulbs. The LED light bulbs we sell operate on a UK standard 240V AC, and the light bulbs have a built-in transformer to change this 240V to the LED required voltage.
These numbers tell you the maximum wattage that the transformer can carry. For example, a 40VA transformer can handle up to a 40-watt halogen light bulb, while a 10-60VA one can carry between 10 and 60 watts worth of bulbs. Some transformers might just carry one individual light bulb, while others might be able to carry several lower wattage light bulbs in a series. I’m considering changing our existing spots in the house to LED which are MR16 50W halogen bulbs connected in a series of 3 to an Aurora AU-150 transformer rated 50-150VA. We’ve got quite a lot of these throughout the house and if possible I’d like to avoid replacing these (due to the cost) with an LED driver equivalent. Would the existing transformer work with cool white 4000K LEDs? WWe don’t use dimmer switches at the moment but it would be a nice option – we have double switches at the moment.
I currently have down lights with Osram decode 51s (12V 50W) halogen bulbs. Each light has a dimmable 60VA transformer connected. Could you please advise on a suitable replacement dimmable LED bulb? The G4 Bayonet Light is non dimmable and has a 2.5 watt light bulb. A warm white (3000K) light is very similar to a normal 20W halogen bulb and can be sufficiently bright. Can I replace gu5 3 halogen with LED? For example, if you have one 35W halogen installed in your kitchen, ensure you swap it for 35W equivalent LED. The actual wattage of the LED light bulb may vary, but the equivalent wattage must be the same as your current halogen light bulbs. For example, you might find both 5W and 6W LED light bulbs that have an equivalent wattage of 35W; both of these would be fine to replace 35W halogen light bulbs.”
They are brighter and produce a negligible amount of heat as compared to them. Moreover, the average life of a G4 LED capsuleis 30000 hours, which is ten times more than the halogen bulb. They have no toxic chemicals like mercury or Barium, thus posing no threat to human health.The number 4 in the name indicates the center-to-center distance between two pins, which is 4mm in this type. Anyone know the answer to this ?……My lights are 12 volt……20 Watt max…….Halogen…With transformer….. There are 4 lights…… 20w bulb in each one……MR16….GU5.3…. 50mm wide by 45mm depth I have 2 gu4 halogen bulbs in my fireplace. I’ve tried to replace with two led bulbs. When I install the new led bulbs they dont work. If I leave one led bulb in and install 1 halogen bulb in the led light lights up. The halogen bulb does not. Yes, that’s right. The maximum load that the transformer/driver can handle is what you should be looking for in your MR16 downlights. If you have 35W halogen downlights that are installed with 10 to 60VA transformers, we can replace them with a new set of lights. Can I put LED bulbs in halogen fittings?
Great Deal 
New Comment